Axminster AHBGDL Hobby Series Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Шлифовальный станок Axminster AHBGDL Hobby Series. Axminster AHBGDL Hobby Series 16 страниц. Wide stone grinder

Good Working Practices/Safety
The following suggestions will enable you to observe good working practices, keep yourself and
fellow workers safe and maintain your tools and equipment in good working order.
!
WARNING!!
Primary Precautions
These machine are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before using
the machine inspect the cable and the plug to make sure that neither are damaged. If any
damage is visible have the machine inspected/repaired by a suitably qualified person. If it is
necessary to replace the plug, it is preferable to use an 'unbreakable' type that will resist
damage on site. Only use a 13 Amp plug, and make sure the cable clamp is tightened securely.
Fuse as required. If extension leads are to be used, carry out the same safety checks on them,
and ensure that they are correctly rated to safely supply the current that is required for your
machine.
!
If the machine is not fitted with a NvR type ON/OFF switch, always check that
the machine is OFF before connecting it to the mains supply.
Work Place/Environment
The machine is designed for indoor operation, do not use when or where it is liable to get wet.
If the machine is to be used outside and it starts to rain, stop work and move it inside. If the
machine has got wet; dry it off as soon as possible, with a cloth or paper towel. Do not use
230Va.c. powered machines anywhere within a site area that is flooded or puddled, and do not
trail extension cables across wet areas. Keep the machines clean; it will enable you to more
easily see any damage that may have occurred. Clean the machine with a damp soapy cloth if
needs be, do not use any solvents or cleaners, as these may cause damage to any plastic parts
or to the electrical components. Keep the work area as uncluttered as is practical, this includes
personnel as well as material.
Under no circumstances should CHILDREN be allowed in work areas.
WARNING!!

General Instructions for 230V Machines

KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
Mains Powered Tools
05