AccuMed ABP802 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AccuMed ABP802. AccuMed ABP802 16 páginas. Upper arm blood pressure monitor

Patient must follow doctor's instructions and should not

perform self-judgment and self-treatment by the measuring

result. Self-diagnosis on measured results and treatment are dangerous. The

device should not be used to judge illness, first aid, and continuously monitor

measuring. This device cannot be used for patient transport and surgical care.

It can be used in household or fixed places only. Please press "on/off" button to

stop work when you feel uncomfortable, or if the air is inflating abnormally

without stopping.

Do not let a child below 12 years old and the people who can't express their

intention use this. When it is used by the people of 12~18 years old, they

should accompanied by an adult.

Do not use the unit for purpose other than measuring blood pressure.

Please do not use a mobile phone around the device. Please do not use the

device around the magnetic field.

Do not disassemble, repair, or remodel the main unit or the arm cuff of the

blood pressure monitor. This will cause the unit to malfunction.

Make sure the connection tubing is not kinked before measuring to avoid any injury to patient.

For any patient, do not measure more than 3 times continuously. Wait for at least 5 minutes

between any two measurements; otherwise it will cause extravasated blood.

Do not measure your blood pressure over 6 times each day.

Do not apply the cuff over a wound as this can cause further injury.

Do measure on the arm on the same side as a mastectomy, otherwise it could cause injury.

Observe the air pressure value on the LCD display.

When measuring, it should not exceed 299 mmHg, otherwise please press the "on/off " button

to stop.

Do not use force to bend the arm cuff or the air tube.

Do not knock or drop the main unit.

Always use the accessories specified in the manual, the use of other parts not approved by the

manufacturer may cause faults or injuries.

For service information, parts list, etc., please contact the dealer.

Requests from Manufacturer