AccuMed ABP802 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor ciśnienia krwi AccuMed ABP802. AccuMed ABP802 16 stron. Upper arm blood pressure monitor
Drukuj stronęPatient must follow doctor's instructions and should not
perform self-judgment and self-treatment by the measuring
result. Self-diagnosis on measured results and treatment are dangerous. The
device should not be used to judge illness, first aid, and continuously monitor
measuring. This device cannot be used for patient transport and surgical care.
It can be used in household or fixed places only. Please press "on/off" button to
stop work when you feel uncomfortable, or if the air is inflating abnormally
without stopping.
Do not let a child below 12 years old and the people who can't express their
intention use this. When it is used by the people of 12~18 years old, they
should accompanied by an adult.
Do not use the unit for purpose other than measuring blood pressure.
Please do not use a mobile phone around the device. Please do not use the
device around the magnetic field.
Do not disassemble, repair, or remodel the main unit or the arm cuff of the
blood pressure monitor. This will cause the unit to malfunction.
Make sure the connection tubing is not kinked before measuring to avoid any injury to patient.
For any patient, do not measure more than 3 times continuously. Wait for at least 5 minutes
between any two measurements; otherwise it will cause extravasated blood.
Do not measure your blood pressure over 6 times each day.
Do not apply the cuff over a wound as this can cause further injury.
Do measure on the arm on the same side as a mastectomy, otherwise it could cause injury.
Observe the air pressure value on the LCD display.
When measuring, it should not exceed 299 mmHg, otherwise please press the "on/off " button
to stop.
Do not use force to bend the arm cuff or the air tube.
Do not knock or drop the main unit.
Always use the accessories specified in the manual, the use of other parts not approved by the
manufacturer may cause faults or injuries.
For service information, parts list, etc., please contact the dealer.
Requests from Manufacturer
2