Accuphase P-7100 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Accuphase P-7100. Accuphase P-7100 18 páginas. Stereo power amplifier

Set the POWER switch of the P-7100 to OFF.

Set the mode selector @ on the rear panelto BR|DGE.

Connect the input signal to the LEFT side INPUTS connector (UNBALANCED or

BALANCED).

Connect the loudspeaker as follows.

SPEAKERS LEFT O terminalof P-7100 <+ O terminalon speaker

SPEAKERS RIGHT () terminal of P-7100 <+ C terminal on speaker

* Note: Leave the SPEAKERS C terminals on the P-7100 unconnected.

Turn power to the P-7100 on and select the input type with the input selector

button El on the front panel(BALANCED or UNBALANCED).

* Verify that the bridged connection indicator f

i. lit.

Panel operation and indicators

When bridged connection is used, the P-71 00 operates as a monophonic amplifier.

Input type

Bridge connection indicatorfl

The LED for the input type

selected with the inout selector

button @ lights up.

Lights up when mode selector @

on rear oanel is set to BRIDGE.

BRIDGE CONNECTION

Input signal

To LEFT input

connector

lriErl

GIGITT'

Press INPUT button to select

UNBALANCED oT BALANCED

1 0

Input selector button p

Loudspeaker