Accuphase P-7100 사용 설명서 - 페이지 12
{카테고리_이름} Accuphase P-7100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accuphase P-7100 18 페이지. Stereo power amplifier
페이지 인쇄a
f
I
Set the POWER switch of the P-7100 to OFF.
2
Set the mode selector @ on the rear panelto BR|DGE.
Connect the input signal to the LEFT side INPUTS connector (UNBALANCED or
BALANCED).
Connect the loudspeaker as follows.
SPEAKERS LEFT O terminalof P-7100 <+ O terminalon speaker
SPEAKERS RIGHT () terminal of P-7100 <+ C terminal on speaker
* Note: Leave the SPEAKERS C terminals on the P-7100 unconnected.
Turn power to the P-7100 on and select the input type with the input selector
button El on the front panel(BALANCED or UNBALANCED).
* Verify that the bridged connection indicator f
i. lit.
Panel operation and indicators
When bridged connection is used, the P-71 00 operates as a monophonic amplifier.
Input type
Bridge connection indicatorfl
The LED for the input type
selected with the inout selector
button @ lights up.
Lights up when mode selector @
on rear oanel is set to BRIDGE.
o
BRIDGE CONNECTION
Input signal
To LEFT input
connector
lriErl
GIGITT'
Press INPUT button to select
UNBALANCED oT BALANCED
1 0
Input selector button p
Loudspeaker