Cino SD112 Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Router inalámbrico Cino SD112. Cino SD112 5 páginas. Bluetooth smart dongle
También para Cino SD112: Manual de inicio rápido (4 páginas)

Imprimir página

Unpairing Bluetooth Imager from Dongle

To unpair an imager from your dongle, scan the "Uninstall" barcode with such

imager. If unpairing is successful, the imager will beep 4 times in descending

tone. Both the dongle and the imager will also emit red-green flashes to

reflect their unpaired state.

Creating a Barcode for PAIR Mode

Under PAIR mode, only one imager can be paired with the smart dongle. The

original Quick Pair barcode on the smart dongle is for PAIR mode. To create a

back up pairing barcode under this mode, please follow the instructions

below.

Pair your dongle with an imager using the Quick Pair barcode.

Thereafter, scan the "System Information" command barcode. The

dongle's MAC addresses will be displayed on your host device.

Use your barcode generator to create a pairing barcode for PAIR mode.

The barcode's symbology should be Code 128, and its format ought to be

as follows:

<Fnc 3>Pxxxxxx

P is the prefix. xxxxxx represents the last 6 characters of the smart

dongle's MAC address

For example, if the dongle's MAC address is "00 25 14 11 11 11", the

pairing barcode will be: P111111

Locked Pair Mode

When your imager is paired with a smart dongle under PAIR mode, they

become "locked" by default, i.e. other imagers will be prevented from pairing

with the dongle. To establish an "unlocked" connection, scan the "Unlocked

Pair Mode" command before pairing with the dongle. To revert back to the

default setting afterwards, scan the "Locked Pair Mode" command.

Locked Pair Mode ◆

UNINSTALL

SYSTEM INFORMATION

Unlocked Pair Mode