Cino SD112 Manual de inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de inicio rápido para Router inalámbrico Cino SD112. Cino SD112 5 páginas. Bluetooth smart dongle
También para Cino SD112: Manual de inicio rápido (4 páginas)
Imprimir página
Override the locked scanner
To override and replace the imager that is locked to a smart dongle, scan the
"Override the locked scanner" command with your new imager. Thereafter,
scan the dongle's "Quick Pair" barcode label. The locked Bluetooth pairing
will be overridden / removed, and the new imager will be connected instead.
Creating a Barcode for PICO Mode
Under PICO mode, multiple imagers (up to 7) can be paired with a smart
dongle simultaneously. To establish pairings under this mode, you must
create a pairing barcode for this purpose with a barcode generator.
Pair your dongle with an imager using the Quick Pair barcode.
Thereafter, scan the "System Information" command barcode. The
dongle's MAC addresses will be displayed on your host device.
Use your barcode generator to create the pairing barcode for PICO mode.
The barcode's symbology should be Code 128, and its format ought to be
as follows:
<Fnc 3>Mxxxxxx
M is the prefix. xxxxxx represents the last 6 characters of the smart
dongle's MAC address.
For example, if the dongle's MAC address is "00 25 14 11 11 11", the
pairing barcode will be: M111111
To unpair an imager under PICO mode, please scan the "Uninstall"
barcode.
Indications
Event
Power on
Dongle Upgrading
Unpaired
Radio Connected
PICO Mode
Radio Disconnected
Radio Connected
PAIR Mode
Radio Disconnected
Override the locked scanner
SYSTEM INFORMATION
Power/Pairing Indicator
1 blue blink
Off
Off
Steady blue
Off
Steady blue
Off
3
Status Indicator
Off
Steady red
Alternative red-green blinks
Steady Green
Steady red
Off
Steady red