Axor Montreux 16506XX1 Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Mobiliario interior Axor Montreux 16506XX1. Axor Montreux 16506XX1 8 páginas. Single-hole faucet
También para Axor Montreux 16506XX1: Lista de piezas (1 páginas)

Install the pop-up drain

Remove the plunger assembly.
Unscrew the drain outlet flange from the tee.
Unscrew the tailpiece from the tee. Wrap the
plunger
threads with Teflon
thread tape and replace.
TM
height adjuster
Install the white, flexible sealing gasket to the
flange. Place it in the sink outlet.
flange
From under the sink, install the black mack gas-
ket, white friction ring , and retainer nut to the
flange. Do not tighten the nut against the bottom
of the sink at this time.
sealing gasket
Thread the tee and tailpiece to the flange. The
pivot must face the faucet. If necessary, turn the
drain assembly.
mack gasket
Tighten the retainer nut.
vertical rod
friction ring
Place the plunger assembly in the drain.
Install the horizontal rod so that the end goes
retainer nut
through the loop in the bottom of the height
adjuster.
tee
Install and hand tighten the pivot ball nut.
pivot ball nut
Attach the swivel connector to the end of the
horizontal rod.
tailpiece
Attach the swivel connector to the end of the
vertical rod. Position as desired, and tighten
with a small, flathead screwdriver.
horizontal rod
swivel connector
5