Axor Montreux 16506XX1 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Axor Montreux 16506XX1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Montreux 16506XX1 8 페이지. Single-hole faucet
Axor Montreux 16506XX1에 대해서도 마찬가지입니다: 부품 목록 (1 페이지)

페이지 인쇄

Install the pop-up drain

Remove the plunger assembly.

Unscrew the drain outlet flange from the tee.

Unscrew the tailpiece from the tee. Wrap the

plunger

threads with Teflon

thread tape and replace.

height adjuster

Install the white, flexible sealing gasket to the

flange. Place it in the sink outlet.

flange

From under the sink, install the black mack gas-

ket, white friction ring , and retainer nut to the

flange. Do not tighten the nut against the bottom

of the sink at this time.

sealing gasket

Thread the tee and tailpiece to the flange. The

pivot must face the faucet. If necessary, turn the

drain assembly.

mack gasket

Tighten the retainer nut.

vertical rod

friction ring

Place the plunger assembly in the drain.

Install the horizontal rod so that the end goes

retainer nut

through the loop in the bottom of the height

adjuster.

tee

Install and hand tighten the pivot ball nut.

pivot ball nut

Attach the swivel connector to the end of the

horizontal rod.

tailpiece

Attach the swivel connector to the end of the

vertical rod. Position as desired, and tighten

with a small, flathead screwdriver.

horizontal rod

swivel connector