Arca-Swiss Core60leveler Manual - Página 2

Navegue en línea o descargue pdf Manual para Accesorios para cámaras Arca-Swiss Core60leveler. Arca-Swiss Core60leveler 2 páginas.

Imprimir página

Congratulations on your purchase of the latest ARCA-SWISS

CoreLeveler.

IMPORTANT: the panning situated on top of the CoreLeveler

should be used as the LAST adjustment !

gear self-locking

control knob

3/8"-16 Thread

Exclusive to the Core 75 leveler: telescopic knobs

click!

ARCA-SWISS quick release device

All tripod heads from ARCA-SWISS are available with a choice of quick release: Classic,

flipLock® and monoball®Fix. The Classic and flipLock® systems are equipped with a

double dovetail so that you can fit the classic camera plates in the upper dovetail and the

monoball®Fix to the bottom. The Fix system is compatible with the monoball®Fix plates.

All three of them are compatible with the monorails of the ARCA-SWISS cameras.

Classic

monoball®Fix

ARCA-SWISS

camera plate

monorail unit

monoball®Fix

monoball®Fix instructions :

1. Open by pulling the clamping lever with your thumb

2. Insert the cameraplate (side opposite the clamping lever)

3. if necessary, center the cameraplate

4. important: lock by clicking on the clamping lever !

Open position

panning

locking

levers

monoball®Classic

camera plate

4 click !

Sliding position

Lock position

Option for the Core75leveler

Incremental panning ClicPan® (cp)

Index scale

(2)

OFF position

(3)

Adjustment ring

(1)

(1) Select a panoramic overlap interval by rotating the white index mark on the

clicPan® (brass) adjustment ring. Rotate the ring until the index mark is aligned with

your preferred interval detent setting.

Ten positions are provided on the lower scale - 40° (9 stops), 30° (12 stops), 24° (15

stops), 20° (18 stops), 15° (24 stops), 12° (30 stops), 10° (36 stops), 7.5° (48 stops),

6° (60 stops) with an "OFF" position for 360° free panning movement.

The clicPan® adjustment ring will turn in either direction. When rotated, the

adjustment ring will stop and "clic" into the next detent setting.

Once a setting has been chosen, the mounted camera will pan in equal increments

through a 360° radius, with an audible "clic" at each position.

(2) The degree of rotation can be visually checked using the upper index scale.

(3) Move the clicPan® ring to the "OFF" position when 360° free panning is required.

(4) To stop all panning rotation, tighten the upper panning lock lever.

The upper pan must be unlocked when making incremental panoramic captures using

one of the detent settings.

flipLock® instructions :

The ARCA-SWISS flipLock® quick release allows the use of the (most common)

ARCA-SWISS "classic" camera plates, thanks to the two levels, all camera plates are also

compatible with the new standard monoball®Fix.

The ARCA-SWISS flipLock® quick release offers an adjustment

option that adapt to various camera plates that comply with the

flipLock®

"ARCA-SWISS standard". Tolerances may vary from brand to brand.

The ARCA-SWISS quick release flipLock® offers 3 positions:

Extension

bracket

The first position - locked

position - closed/locked

lever - does not allow any

movement.

The change from one position to the other is

performed as follows:

1. Pull the release button towards you

between your thumb and forefinger.

2. Then turn the lever 90° to the stop.

Quickset device Classic instructions :

To open, turn the knob counterclockwise.

To close, turn the knob clockwise.

40°

OFF

6°

7.5°

10°

! longer edge of the plate toward the lever

The "classic" camera

plates are fixed on

the upper level of

the quick release.

The second position - sliding

position - lever rotated 90°-

allows safe adjustment of the

desired position.

To change from the sliding position to the

open position:

3. Push the serrated pin outward with a

press of your thumb.

4. Then swivel the lever until it is fully open.

Panning

lock lever

(4)

The camera plates with

the new standard

monoball®Fix are fixed

on the lower level.

The third position -

opening position - lever

by 180° - allows full

release/open position.