Arca-Swiss Core60leveler Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria do kamer Arca-Swiss Core60leveler. Arca-Swiss Core60leveler 2 stron.
Drukuj stronęCongratulations on your purchase of the latest ARCA-SWISS
CoreLeveler.
IMPORTANT: the panning situated on top of the CoreLeveler
should be used as the LAST adjustment !
gear self-locking
control knob
3/8"-16 Thread
Exclusive to the Core 75 leveler: telescopic knobs
click!
ARCA-SWISS quick release device
All tripod heads from ARCA-SWISS are available with a choice of quick release: Classic,
flipLock® and monoball®Fix. The Classic and flipLock® systems are equipped with a
double dovetail so that you can fit the classic camera plates in the upper dovetail and the
monoball®Fix to the bottom. The Fix system is compatible with the monoball®Fix plates.
All three of them are compatible with the monorails of the ARCA-SWISS cameras.
Classic
monoball®Fix
ARCA-SWISS
camera plate
monorail unit
monoball®Fix
monoball®Fix instructions :
1. Open by pulling the clamping lever with your thumb
2. Insert the cameraplate (side opposite the clamping lever)
3. if necessary, center the cameraplate
4. important: lock by clicking on the clamping lever !
2
1
Open position
panning
locking
levers
monoball®Classic
camera plate
3
4 click !
Sliding position
Lock position
Option for the Core75leveler
Incremental panning ClicPan® (cp)
Index scale
(2)
OFF position
(3)
Adjustment ring
(1)
(1) Select a panoramic overlap interval by rotating the white index mark on the
clicPan® (brass) adjustment ring. Rotate the ring until the index mark is aligned with
your preferred interval detent setting.
Ten positions are provided on the lower scale - 40° (9 stops), 30° (12 stops), 24° (15
stops), 20° (18 stops), 15° (24 stops), 12° (30 stops), 10° (36 stops), 7.5° (48 stops),
6° (60 stops) with an "OFF" position for 360° free panning movement.
The clicPan® adjustment ring will turn in either direction. When rotated, the
adjustment ring will stop and "clic" into the next detent setting.
Once a setting has been chosen, the mounted camera will pan in equal increments
through a 360° radius, with an audible "clic" at each position.
(2) The degree of rotation can be visually checked using the upper index scale.
(3) Move the clicPan® ring to the "OFF" position when 360° free panning is required.
(4) To stop all panning rotation, tighten the upper panning lock lever.
The upper pan must be unlocked when making incremental panoramic captures using
one of the detent settings.
flipLock® instructions :
The ARCA-SWISS flipLock® quick release allows the use of the (most common)
ARCA-SWISS "classic" camera plates, thanks to the two levels, all camera plates are also
compatible with the new standard monoball®Fix.
The ARCA-SWISS flipLock® quick release offers an adjustment
option that adapt to various camera plates that comply with the
flipLock®
"ARCA-SWISS standard". Tolerances may vary from brand to brand.
The ARCA-SWISS quick release flipLock® offers 3 positions:
Extension
bracket
The first position - locked
position - closed/locked
lever - does not allow any
movement.
1
2
The change from one position to the other is
performed as follows:
1. Pull the release button towards you
between your thumb and forefinger.
2. Then turn the lever 90° to the stop.
Quickset device Classic instructions :
To open, turn the knob counterclockwise.
To close, turn the knob clockwise.
30
15
0
15
30
45
60
75
90
75
60
40°
OFF
6°
7.5°
10°
! longer edge of the plate toward the lever
The "classic" camera
plates are fixed on
the upper level of
the quick release.
The second position - sliding
position - lever rotated 90°-
allows safe adjustment of the
desired position.
3
To change from the sliding position to the
open position:
3. Push the serrated pin outward with a
press of your thumb.
4. Then swivel the lever until it is fully open.
Panning
lock lever
(4)
The camera plates with
the new standard
monoball®Fix are fixed
on the lower level.
The third position -
opening position - lever
by 180° - allows full
release/open position.
4