CipherLab 2560 Series Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Escáner CipherLab 2560 Series. CipherLab 2560 Series 14 páginas. Bluetooth scanner, bt base bluetooth scanner cradle
Imprimir páginaCHARGING THE BATTERY VIA CHARGER
The battery charger is provided for charging the battery only. You may purchase the
charger separately. It takes approximately 3 hours to charge the battery to full.
Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It
is recommended to charge the battery at room temperature (18°C to 25°C) for
optimal performance.
1) Slide the battery smoothly until the latch rises to secure it.
2) Connect the power supply cord to the charger.
3) Connect the other end of the power cord to a suitable power outlet.
Status LED
Red,
---
solid
Red,
---
solid
---
Green,
solid
Red,
Green,
solid
solid
---
---
Meaning
Charger power ON without battery inserted (LED on for 0.5 second)
Charging battery
Charging done
Pre-charging when battery voltage under 3V (Typical)
Power or battery not ready
7