CipherLab 2560 Series 사용자 설명서 - 페이지 11

{카테고리_이름} CipherLab 2560 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CipherLab 2560 Series 14 페이지. Bluetooth scanner, bt base bluetooth scanner cradle

페이지 인쇄

CHARGING THE BATTERY VIA CHARGER

The battery charger is provided for charging the battery only. You may purchase the

charger separately. It takes approximately 3 hours to charge the battery to full.

Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It

is recommended to charge the battery at room temperature (18°C to 25°C) for

optimal performance.

1) Slide the battery smoothly until the latch rises to secure it.

2) Connect the power supply cord to the charger.

3) Connect the other end of the power cord to a suitable power outlet.

Status LED

Red,

---

solid

Red,

---

solid

---

Green,

solid

Red,

Green,

solid

---

Meaning

Charger power ON without battery inserted (LED on for 0.5 second)

Charging battery

Charging done

Pre-charging when battery voltage under 3V (Typical)

Power or battery not ready