ABB mFLO Series Manual de inicio - Página 18

Navegue en línea o descargue pdf Manual de inicio para Controlador ABB mFLO Series. ABB mFLO Series 20 páginas.

Local Protocol. Displayed when PCCU32 port is active and

running TOTALFLOW Local Protocol.

Packet Protocol. The Totalflow Packet protocol is

selected for the port assigned to this annunciator.

LevelMaster Protocol: The LevelMaster protocol is

selected for the port assigned to this annunciator.

B F

Back Flow Condition: Visible only when the DP variable is

being displayed.

Zero Flow Condition: Visible only when the Flow Rate variable

is being displayed.

Hold: Displayed when PCCU32 is in Calibration Mode

and has a measurement application in Hold mode.

Alarm Condition. Need to view alarm. You may need to

compare application limits to current values to determine

where the alarm condition is present.

A to D Failure. Displayed if A to D Converter's Differential

Pressure, Absolute Static Pressure or temperature readings

exceed maximum counts or are less than minimum counts.

A number represents the Display Group number currently

being displayed.

↑

The displayed item's value is above the Data High Limit value

specified on the display Item Setup screen.

↓

The displayed item's value is below the Data Low Limit value

specified on the display Item Setup screen.

Measurement Applications

Display Application