ABB mFLO Series Manual de inicio - Página 19

Navegue en línea o descargue pdf Manual de inicio para Controlador ABB mFLO Series. ABB mFLO Series 20 páginas.

TIP:

If the Display Does Not Scroll As Expected

When power is first applied, the unit should quickly go through startup

and begin cycling through the pre-programmed display items. If the

display does not scroll after startup and/or looks similar to the following:

(Part numbers are for example only)

6200

FLO Boot Prom

2100917-001 (COPYRIGHT)

Disconnect the main power and then re-connect it. You should see

something similar to:

Verifying Flash

COLD BOOT

XXXXX

Flash 2100917-001

Checksum = XXXX

6213

FLO Flash

Verify Passed

2100917-001 (COPYRIGHT)

If the display still doesn't scroll, try disconnecting the power and re-

connecting it again. If still no success, do the following:

With PCCU32, connect to the unit and establish communications such as

Connect To Totalflow, Entry Mode, etc. Go into Terminal Mode and type

"0.0.0=COLD" (Do not enter quotes). The unit should go through a Cold

Start procedure and then begin scrolling. If this does not succeed, call

the number on the back of this guide and talk to a customer service

representative.