Axxess ASWC-1 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Axxess ASWC-1. Axxess ASWC-1 6 páginas. Connections
También para Axxess ASWC-1: Instrucciones de instalación (4 páginas), Instrucciones (5 páginas)
Imprimir página
used on the ASWC-1. Double check connections and the vehicle information sheet
to verify that you have the correct wires connected.
nd
The 2
set of red LED flashes represents what brand radio the ASWC-1 has
auto-detected. Each flash is for a different radio manufacturer.
st
1
LED flash
nd
2
LED flash
rd
3
LED flash
th
4
LED flash
th
5
LED flash
th
6
LED flash
th
7
LED flash
th
8
LED flash
th
9
LED flash
th
10
LED flash
th
11
LED flash
th
12
LED flash
th
13
LED flash
th
14
LED flash
th
15
LED flash
th
16
LED flash
th
17
LED flash
th
18
LED flash
Note: If the ASWC-1 flashes 7 times and you do not have an Alpine radio connected
to it that means that the ASWC-1 did not see any radio connected. Verify the 3.5mm
connector is connected to the SWC input on the radio.
Remapping the SWC (steering wheel control) Buttons
Once you have the ASWC-1 programmed you can then change the steering wheel
control button assignment(s), for example, programming the "Seek up" button as a
"Preset up" function. Follow the steps below to remap the SWC buttons.
1) Have the ASWC-1 visible so you can see the LED flashes to confirm
button recognition.
Eclipse
Kenwood
Clarion
Sony and Dual
JVC
Pioneer and Jensen
Alpine*
Visteon
Valor
Clarion 5v
Metra OE
Eclipse type 2
LG
PARROT
XITE
Phillips
TBD
JBL