Aydin Displays VFP20 series Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para TV de pantalla plana Aydin Displays VFP20 series. Aydin Displays VFP20 series 17 páginas. 20" flat panel display
Imprimir páginaVIDEO DETECT: Selects the method of video detection when more than one computer is connected.
FIRST DETECT:
LAST DETECT:
NONE:
DVI SELECTION: This function selects the DVI input mode (Input 1). When the DVI selection has been
AUTO: By using the DVI-D to DVI-D cable, the DVI selection is DIGITAL. By using the HD15 to
DIGITAL: DVI digital input is available.
ANALOG: DVI analog input is available.
NOTE: Depending on the PC/Video card or video signal cable used, this function may not operate.
OFF TIMER: Monitor will automatically power down when the end user has selected a predetermined amount
of time.
TOOLS 2:
LANGUAGE: OSM control menus are available in seven languages.
OSM POSITION: You can choose where you would like the OSM control window to appear on your screen.
Selecting OSM location allows you to manually adjust the position of the OSM control menu left, right, up or
down.
OSM TURN OFF: The OSM control menu time out is selectable from the following preset choices: 10, 20, 30,
45, 60 and 120 seconds.
OSM LOCK OUT: This control completely locks out access to all OSM control functions. When attempting to activate
OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. To activate the
OSM Lock Out function, simultaneously press and hold the SELECT and UP buttons. To deactivate the OSM Lock Out
function, simultaneously press and hold the SELECT and UP buttons.
RESOLUTION NOTIFIER: This optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the screen
after 30 seconds, notifying the operator that the resolution is not at 1600 x 1200.
HOT KEY: You can adjust the brightness and contrast directly. When this function is set to ON, the brightness
can be adjusted with the LEFT and RIGHT keys, the contrast can be adjusted with the UP and DOWN keys,
while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset resets most OSM control settings back to the factory settings. Individual
settings can be reset by highlighting the control to be reset and pressing the RESET button.
150-VF20-001(A).doc
The video input has to be switched to "FIRST DETECT" mode.
When the current video input signal is not present, the monitor
searches for a video signal from the other video input. If the video signal is
present in the other port, then the monitor will automatically switch to the
new video source. The monitor will not look for other video signals while
the current video source is present.
The video input has to be switched to "LAST DETECT" mode.
When the monitor is displaying a signal from the current source and a new
secondary source is supplied to the monitor, then the monitor will
automatically switch to the new video source. When current video input
signal is not present, then the monitor searches for a video signal from the
other video input port. . If the video signal is present in the other port, then
the monitor will automatically switch to the new video source.
The monitor will not search the other video-input port unless the monitor is
turned on.
changed, you must restart the computer.
DVI-A cable, the DVI selection is ANALOG.
9