Aydin Displays VFP20 series User Manual - Page 9

Browse online or download pdf User Manual for Flat Panel TV Aydin Displays VFP20 series. Aydin Displays VFP20 series 17 pages. 20" flat panel display

Print Page

VIDEO DETECT: Selects the method of video detection when more than one computer is connected.

FIRST DETECT:

LAST DETECT:

NONE:

DVI SELECTION: This function selects the DVI input mode (Input 1). When the DVI selection has been

AUTO: By using the DVI-D to DVI-D cable, the DVI selection is DIGITAL. By using the HD15 to

DIGITAL: DVI digital input is available.

ANALOG: DVI analog input is available.

NOTE: Depending on the PC/Video card or video signal cable used, this function may not operate.

OFF TIMER: Monitor will automatically power down when the end user has selected a predetermined amount

of time.

TOOLS 2:

LANGUAGE: OSM control menus are available in seven languages.

OSM POSITION: You can choose where you would like the OSM control window to appear on your screen.

Selecting OSM location allows you to manually adjust the position of the OSM control menu left, right, up or

down.

OSM TURN OFF: The OSM control menu time out is selectable from the following preset choices: 10, 20, 30,

45, 60 and 120 seconds.

OSM LOCK OUT: This control completely locks out access to all OSM control functions. When attempting to activate

OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. To activate the

OSM Lock Out function, simultaneously press and hold the SELECT and UP buttons. To deactivate the OSM Lock Out

function, simultaneously press and hold the SELECT and UP buttons.

RESOLUTION NOTIFIER: This optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the screen

after 30 seconds, notifying the operator that the resolution is not at 1600 x 1200.

HOT KEY: You can adjust the brightness and contrast directly. When this function is set to ON, the brightness

can be adjusted with the LEFT and RIGHT keys, the contrast can be adjusted with the UP and DOWN keys,

while the OSM menu is off.

FACTORY PRESET: Selecting Factory Preset resets most OSM control settings back to the factory settings. Individual

settings can be reset by highlighting the control to be reset and pressing the RESET button.

150-VF20-001(A).doc

The video input has to be switched to "FIRST DETECT" mode.

When the current video input signal is not present, the monitor

searches for a video signal from the other video input. If the video signal is

present in the other port, then the monitor will automatically switch to the

new video source. The monitor will not look for other video signals while

the current video source is present.

The video input has to be switched to "LAST DETECT" mode.

When the monitor is displaying a signal from the current source and a new

secondary source is supplied to the monitor, then the monitor will

automatically switch to the new video source. When current video input

signal is not present, then the monitor searches for a video signal from the

other video input port. . If the video signal is present in the other port, then

the monitor will automatically switch to the new video source.

The monitor will not search the other video-input port unless the monitor is

turned on.

changed, you must restart the computer.

DVI-A cable, the DVI selection is ANALOG.