CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Luminaria CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series. CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series 19 páginas.

Imprimir página

INSTALLATION INSTRUCTIONS

C-WR-B-WLIN4-SCCT LED Series

NOTE: The emergency driver and AC driver

must be fed from the same branch circuit.

Make the following Electrical Connections:

STEP 1:

a. Connect the black fixture lead labeled

unswitched hot to the unswitched

voltage supply lead.

b. Connect the black fixture lead labeled

switched hot to the switched voltage

supply lead.

c. Connect the white fixture lead to the

neutral supply lead (Hot 2 for 208/240V

wiring).

d. Connect the bare or green ground fixture

lead to the supply ground lead.

e. If 0/1-10V Dimming is used, connect the

violet fixture lead to the supply positive

dimming lead. If dimming is not being

used ensure to cap off the violet

fixture lead. Class 1 wiring must be used

for dimming connections.

If 0/1-10V Dimming is used, connect the

grey or pink fixture lead to the supply

negative dimming lead. If dimming is not

being used ensure to cap off the grey or

pink fixture lead. Class 1 wiring must be

used for dimming connections

Tuck all wires carefully into wiring chamber

ensuring that no wires are pinched..

ELECTRICAL CONNECTIONS-

Emergency Driver, No Occupancy Sensor

http://lighting.cree.com/warranty

Document:

LPN00601X0001A2_A

Created By:

TMT

LUMINAIRE

LINE- UNSWITCHED

LINE-BLACK

UNSWITCHED

LINE SWITCHED

LINE-BLACK

NEUTRAL OR

HOT 2

GREEN/YELLOW

GROUND

DIM (+)

DIM (-)

866.924.3645

Date:

7-26-2021

SWITCHED

WHITE

BARE OR

VIOLET

GREY OR

PINK