Digilin PosiTouch Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación Digilin PosiTouch. Digilin PosiTouch 6 páginas. Dali lighting controller
Imprimir página
PosiTouch DALI - Lighting Controller
User Manual
7.0 - 23 November 2020
Specifications
Physical
Inputs
Installation
Prior to installation of the PosiTouch, it should be configured using the PosiTouch
Configuration Tool. This configures the DALI commands associated with each
button.
Installation merely requires the connection of the 2 DALI wires. The PosiTouch
draws power from the DALI bus, so there is nothing further to connect. Refer to
Appendix B. DALI Networking Basics for further information regarding DALI wiring.
Operation
The PosiTouch is operated simply by touching the buttons marked on the wall
plate. When a button is active its corresponding LED will turn on, and the
associated action will trigger accordingly.
A c t i o n
Short Press
Long Press
Release
Table 1 Button Actions
Default Configuration
The PosiTouch comes configured by default for basic on/off and dimming control, with the configuration of
fade rate and fade time disabled.
Table 2 Default button actions.
digilin.com.au
+617 3899 1267
Dimensions
Protrusion into wall
Weight
Voltage (as per IEC62386)
Current
Communications
A short press action occurs when a button is pressed and released in under 0.3s.
A long press action occurs when a button is pressed for longer than 0.3s. When some DALI
commands are assigned to a long press they are repeated until the button is released.
A release action occurs when the button is released following a long press.
B u t t o n
A d d r e s s
1
Broadcast
2
Broadcast
3
Broadcast
4
Broadcast
5
Broadcast
6
Broadcast
75 x 11.5 x 10
28.5
28
9 – 22.5
10
DALI (IEC62386)
D e s c r i p t i o n
D e f a u l t A c t i o n
Short Press
Long Press
Go to 100%
Go to 100%
Go to 75%
Go to 75%
Go to 50%
Go to 50%
Go to 0%
Go to 0%
Go to 25%
Go to 25%
Go to 10%
Go to 10%
U n i t s
mm
mm
g
U n i t s
V
mA
DALI Connection
MicroUSB for use with
Configuration Tool
Figure 1 Rear view of the PosiTouch
Release
Stop Dim
Disabled
Disabled
Stop Dim
Disabled
Disabled
Page 3 of 6