Digilin PosiTouch Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación Digilin PosiTouch. Digilin PosiTouch 6 páginas. Dali lighting controller
Imprimir página
PosiTouch DALI - Lighting Controller
User Manual
7.0 - 23 November 2020
DALI Addressing
The configuration tool allows you to set an address that the commands are set to for each button. By
default each button is set to Broadcast, which means all units on the network will respond.
To use any of the other addresses you will need to commission the units to have the addresses & groups
programmed.
Dimming Options
Within the DALI standard there are 3 possible methods to dim a light fitting.
Stop Dim
Any dimming command can be halted through the use of this command. By using it in combination with
the Go to Level command (which uses the DALI Fade Time), a reliable fade can be achieved.
B u t t o n A c t i o n
Long Press
Level
Release
Dim up/Down
These commands will dim the level for a period of 200ms at the rate specified in DALI Fade Rate. They
cannot dim to off, nor can they dim from off. When these commands are assigned to a long press, the
PosiTouch will repeat them every 200ms while the button is pressed.
B u t t o n A c t i o n
Long Press
Step Up/Down
These commands will cause the output to change by a single step. When these commands are assigned to
a long Press, the PosiTouch will repeat them every 40ms. This dimming rate is not adjustable.
B u t t o n A c t i o n
Long Press
digilin.com.au
+617 3899 1267
T o D i m U p
Go to Level
100%
Stop Dim
T o D i m U p
Dim Up
T o D i m U p
Step Up
T o D i m D o w n
Go to Level
0%
Stop Dim
T o D i m D o w n
Dim Down
T o D i m D o w n
Step Down
Page 5 of 6