Crescendo Fitness 280 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Entrenador elíptico Crescendo Fitness 280. Crescendo Fitness 280 16 páginas. Magnet power elliptical bike

(31). (Refer figure 7)
8. Install the Pedals
Attach the left Pedal (5) to the left Pedal support tube (4) with
four M8x50 Bolts (37), Flat washers (50), and M8 Lock nuts (42).
Do the same steps as above to assemble the right Pedal (5) to
the right Pedal support tube (4). (Refer figure 8)
9. Install the Handlebar (Left & Right)
Insert the Left handlebar (8) to the Left Handlebar support (6L)
with four M8x40 Bolts (33), Arc washers (45), Spring washers
(51), and M8 Cap nuts (40). Do the above same steps to
assemble the Left handlebar (8) to the right Handlebar support
(6R). (Refer figure 9)
Note: The bolt must be set into the hexangular hole.
10. Install the nut cap
After installed and adjusted the equipment, clip on the cap nut s
at the connecting of U-shape brackets (87) and Handlebar
supports (6), (Refer Figure 10)
7. Adjustment
1) Resistance can be adjusted by tension control to increase or decrease the exercise intensity.
2) Seat height, back and forth positions can be adjusted by the long and short knobs.
3) After a long-term use, the turning parts may be loose, please tighten the bolts or screws
following the instruction of the engineman.
10