Diginet LEDsmart+ MMDM RT Manual - Página 2

Navegue en línea o descargue pdf Manual para Regulador de intensidad Diginet LEDsmart+ MMDM RT. Diginet LEDsmart+ MMDM RT 12 páginas. Setup functions

Dimmer Setup

The LEDsmart

rotary dimmer has a number of useful functions which can easily be set up by entering setup mode and following

four easy steps.

It is recommended that the MINIMUM BRIGHTNESS is always set up. The other settings are optional, depending on the

dimmer application. To set the minimum brightness now, go to the next page.

Dimmer Setup Functions

Function

Entering Setup Mode

Setting Minimum Brightness

Setting Maximum Brightness

Setting the Kick Start Feature

Setting Off State LED Feature

Setting Separate Switch Mode

Setting Toggle / Memory Dimmer

Setting MultiMate™ Mode

Factory Defaults Reset

A: Entering Setup Mode

Before starting to setup the dimmer, the rotary dial should be removed by pulling it off the

shaft. This allows the white LED indicator to be easily seen during setup.

If the dimmer has been powered up for LESS THAN 15 MINUTES see A1.

If the dimmer has been powered up for MORE THAN 15 MINUTES see A2.

Once in Setup Mode, options are selected by a series of 'clicks' of the dimmer rotary

shaft. Each 'click' should be within 1 second of the previous click.

See Part

Setup Functions - Rotary Dimmer/Switch