Cisco 2950 - Catalyst Switch Manual de introducción - Página 2

Navegue en línea o descargue pdf Manual de introducción para Interruptor Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 29 páginas. Long-reach ethernet switches
También para Cisco 2950 - Catalyst Switch: Manual de soluciones (17 páginas), Boletín de productos (3 páginas), Boletín de asistencia sobre productos (5 páginas), Manual de migración (25 páginas), Boletín de asistencia sobre productos (6 páginas), Ficha de datos (20 páginas), Manual (19 páginas)

About this Guide

This guide provides instructions on how to use Express Setup to initially configure your Catalyst

switch. Also covered are switch management options, basic rack-mounting procedures, port and

module connections, power connection procedures for both AC- and DC-powered switches, and

troubleshooting help.

For additional installation and configuration information for Long-Reach Ethernet (LRE) switches

and for all switch models, refer to the Catalyst 2950 documentation on Cisco.com. For system

requirements, important notes, limitations, open and resolved bugs, and last-minute documentation

updates, see the release notes, also on Cisco.com.

When using the online publications, refer to the documents that match the Cisco IOS software version

running on the switch. The software version is on the Cisco IOS label on the switch rear panel.

You can order printed copies of the manuals from the Cisco.com sites and from the telephone numbers

listed in the "Obtaining Documentation" section on page 21.

For translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information for the Catalyst 2950 Switch that accompanies this guide.

Follow these steps:

1. Unpack and remove the switch and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown on page 3. If any item is missing or damaged,

contact your Cisco representative or reseller for instructions. Some switch models might include

additional items that are not shown on page 3.

You need to supply this equipment to run Express Setup:

• PC

• Ethernet (Category 5) straight-through cable (as shown)