Cisco 300 Series Manual de inicio rápido - Página 14
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Cisco 300 Series. Cisco 300 Series 17 páginas. Managed switches
También para Cisco 300 Series: Ficha de datos (14 páginas), Manual de inicio rápido (18 páginas), Manual de inicio rápido (17 páginas)
Imprimir página
Back Panel
The power port and console port are located on the back panel of the
managed switch.
Power—The Power port is where you will connect the switch to power.
Depending on the model of switch you are using, this may be a power cord
or a power adaptor.
Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.
Returning the Device to the Factory
5
Default Settings
To use the
Reset
following:
• To reboot the managed switch, press the
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the
10 seconds.
14
button to reboot or reset the managed switch, do the
Reset
button for less than 10
Reset
button for more than
300 Series Managed Switches