Cisco 300 Series Manuel de démarrage rapide - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 300 Series. Cisco 300 Series 17 pages. Managed switches
Également pour Cisco 300 Series : Fiche technique (14 pages), Manuel de démarrage rapide (18 pages), Manuel de démarrage rapide (17 pages)
Imprimer la page
Back Panel
The power port and console port are located on the back panel of the
managed switch.
Power—The Power port is where you will connect the switch to power.
Depending on the model of switch you are using, this may be a power cord
or a power adaptor.
Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.
Returning the Device to the Factory
5
Default Settings
To use the
Reset
following:
• To reboot the managed switch, press the
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the
10 seconds.
14
button to reboot or reset the managed switch, do the
Reset
button for less than 10
Reset
button for more than
300 Series Managed Switches