Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Interruptor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 17 páginas. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
También para Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota de instalación (14 páginas), Manual de soluciones (17 páginas), Nota de instalación (46 páginas), Libro Blanco (19 páginas), Descripción (1 páginas), Boletín de productos (6 páginas), Aviso (4 páginas), Ficha de datos (9 páginas), Ficha de datos (18 páginas), Libro Blanco (18 páginas), Manual de configuración (8 páginas), Nota de instalación (28 páginas), Manual de solución de problemas (11 páginas), Nota de instalación (18 páginas), Nota de instalación (24 páginas), Manual (19 páginas), Nota de instalación (36 páginas)

Imprimir página
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Manual del usuario
Cisco Catalyst 6500 Virtual Switching System
Deployment Best Practices
Document ID: 109547
Contents
Introduction
Prerequisites
Requirements
Components Used
When removing the preempt commands in Catalyst 6500 Series Switches in VSS Mode, will it reload the
switches?
Introduction
This document provides best practices for Cisco Catalyst 6500 Virtual Switching System (VSS) 1440
deployment scenarios.
This document provides modular configuration guidance. Therefore, you can read each section independently
and make changes in a phased approach. This document assumes a basic comprehension and familiarity with
the Cisco IOS® Software user interface. The document does not cover overall network design.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.