Cisco Catalyst 2900 Series Manual de instalación del hardware - Página 25
Navegue en línea o descargue pdf Manual de instalación del hardware para Interruptor Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 páginas. Xl modules
También para Cisco Catalyst 2900 Series: Manual (19 páginas)
Imprimir página
Chapter 2
Installation
Caution
Step 1
Step 2
Figure 2-1
Catalyst 2924M XL Switch with an Empty Expansion Slot
Warning
Warning
78-5912-03
When installing a 100BaseFX or 1000BaseX module, do not remove
the rubber plugs from the fiber-optic port or the rubber caps from the
fiber-optic cable until you are ready to connect the cable. The plugs
and caps protect the fiber-optic port and cable from contamination
and ambient light.
To remove a faceplate, follow these steps:
Loosen the thumbscrews attaching the faceplate to the switch.
Remove the faceplate from the switch, and store it for future use. Figure 2-1
shows a Catalyst 2924M XL switch with an empty expansion slot.
Thumbscrews
10BaseT /100Base Tx
Slot 1 with blank
faceplate
After you have removed the faceplate, follow these steps to install a module in the
empty expansion slot.
Class 1 laser product.
Avoid exposure to the laser beam.
Catalyst 2900 Series XL Modules Hardware Installation Guide
XL
SERIES
Slot 2 with
faceplate off
Installing a Module
2-3