Cisco Catalyst 2900 Series Panduan Pemasangan Perangkat Keras - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 halaman. Xl modules
Juga untuk Cisco Catalyst 2900 Series: Manual (19 halaman)
Halaman Cetak
Chapter 2
Installation
Caution
Step 1
Step 2
Figure 2-1
Catalyst 2924M XL Switch with an Empty Expansion Slot
Warning
Warning
78-5912-03
When installing a 100BaseFX or 1000BaseX module, do not remove
the rubber plugs from the fiber-optic port or the rubber caps from the
fiber-optic cable until you are ready to connect the cable. The plugs
and caps protect the fiber-optic port and cable from contamination
and ambient light.
To remove a faceplate, follow these steps:
Loosen the thumbscrews attaching the faceplate to the switch.
Remove the faceplate from the switch, and store it for future use. Figure 2-1
shows a Catalyst 2924M XL switch with an empty expansion slot.
Thumbscrews
10BaseT /100Base Tx
Slot 1 with blank
faceplate
After you have removed the faceplate, follow these steps to install a module in the
empty expansion slot.
Class 1 laser product.
Avoid exposure to the laser beam.
Catalyst 2900 Series XL Modules Hardware Installation Guide
XL
SERIES
Slot 2 with
faceplate off
Installing a Module
2-3