DigiSender TV DG258-2RX Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Transceptor DigiSender TV DG258-2RX. DigiSender TV DG258-2RX 20 páginas. Twin input 5.8ghz wireless av sender system with 2 receivers
Imprimir páginaDG258-2RX - DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Using your DigiSender®
Standard Operation
The steps below should be followed every time you use the DigiSender®.
1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Select Input 1 or 2 by pressing the Power but-
ton once for Input 1 or twice for Input 2 on the
Transmitter. The red Input LED will light to indicate
which source is active.
1' or 'Input 2' button on the DigiSender® Remote Control.
Please read the instructions carefully prior to installation
Alternatively press the 'Input
2.
Turn on the Transmitter and Receiver by pushing
the Power button on the front of the units. The
Power button will light up blue to indicate the unit
is switched on.
Alternatively press the Power button on
the DigiSender® Remote Control.
4.
On the receiving TV, select the SCART channel as-
signed to the SCART socket that you plugged the
DG258-2RX Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or
.
Page 09