DigiSender TV DG258-2RX 설치 매뉴얼 - 페이지 9
{카테고리_이름} DigiSender TV DG258-2RX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiSender TV DG258-2RX 20 페이지. Twin input 5.8ghz wireless av sender system with 2 receivers
페이지 인쇄DG258-2RX - DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Using your DigiSender®
Standard Operation
The steps below should be followed every time you use the DigiSender®.
1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Select Input 1 or 2 by pressing the Power but-
ton once for Input 1 or twice for Input 2 on the
Transmitter. The red Input LED will light to indicate
which source is active.
1' or 'Input 2' button on the DigiSender® Remote Control.
Please read the instructions carefully prior to installation
Alternatively press the 'Input
2.
Turn on the Transmitter and Receiver by pushing
the Power button on the front of the units. The
Power button will light up blue to indicate the unit
is switched on.
Alternatively press the Power button on
the DigiSender® Remote Control.
4.
On the receiving TV, select the SCART channel as-
signed to the SCART socket that you plugged the
DG258-2RX Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or
.
Page 09