Digisol DG-GS1010PF-B Manual de instalación rápida - Página 3

Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Digisol DG-GS1010PF-B. Digisol DG-GS1010PF-B 8 páginas. 8 port 10/100/1000mbps gigabit switch with 2 port 10/100/ 1000mbps uplink ports

Imprimir página

Package Contents :

The following items should be present in your package:

• Switch (1 No)

• Power Cord (1 No)

• Quick Installation Guide

Make sure that the package contains above items.

Product Overview :

This document will guide you on the correct use of products, to prevent any

loss or damage to the device to avoid void of warranty. Please read the

instructions carefully before using the equipment and strictly observe while

using it.

This unmanaged PoE switch series support 4 or 8 nos. of PoE ports with

2 uplink ports in surveillance / VLAN mode. The switches support PoE on all

the downlink ports. The PoE switch provides power and data transmission via

Cat cables. PoE ports supply power at the standard of IEEE802.3af/at. Auto-

sensing function can supply power to PD device (IEEE802.3af/at standard).

If the PoE device disconnected, it would stop supplying power. The PoE

switch features simple and reliable design and automatic identification of

PoE supply voltage and power, speed, full-duplex and Auto Uplink cable type.

This cost-effective switch can apply to wireless access point (AP) and IP-

based surveillance.

Precautions :

• Do not install the equipment in direct sunlight or near any equipment

that generates high amount of heat

• Do not install the equipment in damp, dusty or sooty places

• Always keep the equipment installed horizontally, or on a stable platform

to prevent the product from falling

• Do not drop or spill liquids on the equipment and ensure that liquid-filled

items are not spilled on the equipment

• Prevent any sort of liquid from flowing into equipment

• Install the switch in a well-ventilated place. Do not block the ventilation

vent of the equipment

• Equipment can only be used within the permissible input & output range

• Do not disassemble the equipment by your own self

• Maintain the range of humidity while storing or during transportation