Digisol DG-GS1010PF-B Manual de instalación rápida - Página 6

Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Digisol DG-GS1010PF-B. Digisol DG-GS1010PF-B 8 páginas. 8 port 10/100/1000mbps gigabit switch with 2 port 10/100/ 1000mbps uplink ports

Imprimir página

LED Description :

Indicator light

Colour

PWR LED

Red

Data LNK /

Green

ACT LED

PoE LED

Green

Uplink LED

Green

**Please note:

1) When the extend switch is OFF, PoE devices will work maximum at

100meters with data transmission speeds to 1000Mbps. The devices

connected to the switch can ping each other

2) When the extend mode is ON, the PoE devices will work at 250meters

with data transmission speeds to 10Mbps. Devices on ports 1~8 port

devices can ping the only uplink port individually, but cannot ping each

other.

Please follow the following steps to install:

(1) Please disconnect the power supply of the equipment before installation.

Live installation may cause damage to transmission equipment.

(2) Check whether the network cables and other transmission lines to be

used are connected to the other equipment

(3) Connect DG-GS1010PF-B to the RJ45 interface and PoE network

camera with network cable.

(4) Connect the Uplink port to the NVR port with the network cable.

(5) Check whether the installation is correct, and the equipment is not

damaged to ensure that all connections are reliable, connect the power

cord and power the system.

(6) Verify that the network and PoE power supply are normal.

Extend 250 meters

Please follow the above installation steps from (1) (2) (3) (4)

(5) Push the "Extend" key to the "on" position

(6) Check whether the installation is correct or that the equipment is not

damaged, ensure that all connections are reliable, connect the power

cord and power the system

(7) Verify that the network and PoE power supply are normal

Description

Solid: Switch is powered On

Off: Switch is powered Off

Solid: Network device is connected

Blinking: Data transmission

Off: No network device connected

Solid: PoE device connected

Off: PoE device disconnected

Off: Not connected to network devices

Solid: Connect to network devices