Digisol DG-GS1010PF-B Руководство по быстрой установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель Digisol DG-GS1010PF-B. Digisol DG-GS1010PF-B 8 страниц. 8 port 10/100/1000mbps gigabit switch with 2 port 10/100/ 1000mbps uplink ports
Печатать страницуLED Description :
Indicator light
Colour
PWR LED
Red
Data LNK /
Green
ACT LED
PoE LED
Green
Uplink LED
Green
**Please note:
1) When the extend switch is OFF, PoE devices will work maximum at
100meters with data transmission speeds to 1000Mbps. The devices
connected to the switch can ping each other
2) When the extend mode is ON, the PoE devices will work at 250meters
with data transmission speeds to 10Mbps. Devices on ports 1~8 port
devices can ping the only uplink port individually, but cannot ping each
other.
Please follow the following steps to install:
(1) Please disconnect the power supply of the equipment before installation.
Live installation may cause damage to transmission equipment.
(2) Check whether the network cables and other transmission lines to be
used are connected to the other equipment
(3) Connect DG-GS1010PF-B to the RJ45 interface and PoE network
camera with network cable.
(4) Connect the Uplink port to the NVR port with the network cable.
(5) Check whether the installation is correct, and the equipment is not
damaged to ensure that all connections are reliable, connect the power
cord and power the system.
(6) Verify that the network and PoE power supply are normal.
Extend 250 meters
Please follow the above installation steps from (1) (2) (3) (4)
(5) Push the "Extend" key to the "on" position
(6) Check whether the installation is correct or that the equipment is not
damaged, ensure that all connections are reliable, connect the power
cord and power the system
(7) Verify that the network and PoE power supply are normal
Description
Solid: Switch is powered On
Off: Switch is powered Off
Solid: Network device is connected
Blinking: Data transmission
Off: No network device connected
Solid: PoE device connected
Off: PoE device disconnected
Off: Not connected to network devices
Solid: Connect to network devices