Sharp Aquos LC-19A1E Manual de instrucciones - Página 18
Navegue en línea o descargue pdf Manual de instrucciones para TV LCD Sharp Aquos LC-19A1E. Sharp Aquos LC-19A1E 28 páginas. Lcd colour television
Imprimir página
Menu operations
Sort
Channel positions can be sorted freely.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press a/b to select "Yes", and then press OK.
3
Press a/b/c/d to select the channel you want
to move, and then press OK.
4
Press a/b/c/d to move it to the desired
position, and then press OK.
5
Repeat steps 3 and 4 until all desired channels
are sorted.
Erase Programme
An individual programme can be erased.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press a/b to select "Yes", and then press OK.
3
Press a/b/c/d to select the channel you want
to erase, and then press OK.
4
Press OK to erase the selected programme. All
the subsequent programmes move up.
5
Repeat steps 3 and 4 until all desired channels
are erased.
Child Lock
Allow you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Child Lock", and then press
OK. If you have already set the PIN under "Child
Lock", enter it here.
Change PIN
Reset
4
Press OK and enter the 4-digit number as a PIN
using 0 – 9.
5
Enter the same 4-digit number as in step 4 to
confirm.
• When setting the PIN, "Reset" in the Menu will be
selectable and operational.
NOTE
• To view a locked channel (Lock setting in Programme
Setup "Manual Adjust" is set to "On"), you must enter a
PIN. (See page 15.) When you select a locked channel, a
PIN prompt message pops up. Press OK to display the
PIN input window.
16
TV only
New PIN
–
–
–
–
Reconfirm
–
–
–
–
Resetting the PIN
Allow you to reset your PIN.
1
Repeat steps 1 to 3 in Changing the PIN.
2
Press a/b to select "Reset", and then press OK.
3
Press a/b to select "Yes", and then press OK.
NOTE
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
• See page 21 for resetting the current PIN if you lose or
forget your PIN.
• To relock a channel which has been temporarily
unlocked by inputting the correct PIN, turn power off
and then on again.
Input Label
You can assign each input source a label you like.
1
Press b to select the desired input source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then press
OK.
5
Press a/b to select characters and c/d to move
to the desired digit to label the input source.
• When you want to change the input label that you
have already assigned to the default name, press
c/d to move to "CLEAR" on the "Input Label"
screen, and then press OK.
6
Repeat step 5 above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
• When you want to set an input source name of less
than 6 characters, press MENU to exit from the
labelling menu.
NOTE
• You cannot change the label if the input source is TV.
Position
Menu Operation: C (Page 11)
For adjusting a picture's horizontal and vertical
position.
Item
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
NOTE
• Adjustments are stored separately according to input
source.
• Depending on the input signal type a position setting may
not be available.
TV/AV only