AccuTemp STEAM'N'HOLD Manual de instalación y funcionamiento - Página 11

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Equipamiento alimentario comercial AccuTemp STEAM'N'HOLD. AccuTemp STEAM'N'HOLD 15 páginas. Vacoom steamer

Imprimir página

HIGH TEMP COOKING (212°F/100°C)

To begin high temperature cooking,, set the

timer to desired cooking time, and turn the

selector switch to "ON", if the steamer has to be

started, and then select "Fast Cook".

CONTINUOUS COOK

This feature gives you the flexibility of cooking

independently of the cooking timer and can

be utilized in either "T-STAT COOK" or "FAST

COOK".

Follow either low temperature or high

temperature cooking guidelines but instead of

selecting a time period, rotate the timer knob

clockwise until the white indicator on the timer

knob lines up with the yellow "CONTINUOUS"

position.

MP4011-2207

CHECKING FOOD WHILE COOKING

To maximize efficiency, while minimizing

cooking time, it is always recommended to

allow food to finish it's cook cycle before

opening the cooking compartment door.

However, if the door is opened during a

cooking cycle, a time adjustment may be

necessary, depending on how long and often

the compartment door was opened.

Press the "OFF" button, stand back while

slowly opening the door, allowing the cooking

compartment to vent its steam. Once steam

has vented, carefully check the food and turn

the appliance back "ON" and set for "T-STAT

COOK" or "FAST COOK".

HOLDING

The STEAM'N'HOLD™ will automatically

enter the "HOLD" mode once the set time

has expired, the buzzer will sound, alerting

the operator that the food is ready. A slight

counterclockwise manual adjustment to

the "HOLD" position on the timer knob is

needed to turn off the buzzer. The "Hold"

temperature is determined by the thermostat

setting. It is recommended to preheat the

cooking compartment to the desired holding

temperature if the cooking compartment is

in a cool state. To hold food independently of

cooking, rotate the timer counter clockwise

until the white indicator on the timer knob lines

up with the yellow "HOLD" position. Select

the desired "Hold" temperature and turn the

selector switch to "ON".

STEAM'N'HOLD™