AccuTemp STEAM'N'HOLD Руководство по установке и эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Торговое пищевое оборудование AccuTemp STEAM'N'HOLD. AccuTemp STEAM'N'HOLD 15 страниц. Vacoom steamer
Печатать страницуHIGH TEMP COOKING (212°F/100°C)
To begin high temperature cooking,, set the
timer to desired cooking time, and turn the
selector switch to "ON", if the steamer has to be
started, and then select "Fast Cook".
CONTINUOUS COOK
This feature gives you the flexibility of cooking
independently of the cooking timer and can
be utilized in either "T-STAT COOK" or "FAST
COOK".
Follow either low temperature or high
temperature cooking guidelines but instead of
selecting a time period, rotate the timer knob
clockwise until the white indicator on the timer
knob lines up with the yellow "CONTINUOUS"
position.
MP4011-2207
CHECKING FOOD WHILE COOKING
To maximize efficiency, while minimizing
cooking time, it is always recommended to
allow food to finish it's cook cycle before
opening the cooking compartment door.
However, if the door is opened during a
cooking cycle, a time adjustment may be
necessary, depending on how long and often
the compartment door was opened.
Press the "OFF" button, stand back while
slowly opening the door, allowing the cooking
compartment to vent its steam. Once steam
has vented, carefully check the food and turn
the appliance back "ON" and set for "T-STAT
COOK" or "FAST COOK".
HOLDING
The STEAM'N'HOLD™ will automatically
enter the "HOLD" mode once the set time
has expired, the buzzer will sound, alerting
the operator that the food is ready. A slight
counterclockwise manual adjustment to
the "HOLD" position on the timer knob is
needed to turn off the buzzer. The "Hold"
temperature is determined by the thermostat
setting. It is recommended to preheat the
cooking compartment to the desired holding
temperature if the cooking compartment is
in a cool state. To hold food independently of
cooking, rotate the timer counter clockwise
until the white indicator on the timer knob lines
up with the yellow "HOLD" position. Select
the desired "Hold" temperature and turn the
selector switch to "ON".
STEAM'N'HOLD™
11