DIGISYNTHETIC DS34 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Hardware informático DIGISYNTHETIC DS34. DIGISYNTHETIC DS34 14 páginas. Digital speaker processor

Imprimir página
Operation Instruction
ru. OPERATION
l.
Parameter setting in input channel.
l.l
GAIN & MUTE:press IMUTE] to adjust MUTE or cancel MUTE.
Tum the small rotatory button to adjust the GAIN.
1.2 EQ:Press [TYPE] or IFILTERNO] to enter EQ menu. Press IFILTER NO]
to shift EQ. Press [CH-] .
[CH+1 to shift channel.
Type:Press ITYPE] to shift EQ type:PEQ .
Low-Shelf .
High-Shelf .
All-Pass.
NOTE:EQ type shift only can be operated when EQ and GAIN is 0dB, Othenilise,
the LCD will retum to current screen after display a caution.
Freq: tum tn'nfq1 in PEQ FILIER to adjust EQ frequency, tum IFAST/EDIT]
to adjust fastly.
Gain:turn IGAIN] in PEQFILTER to adjust EQ gain,it's unavailable while EQ type
is All-Pass.
Q:nrm [Q] in PEQ FILTER to adjust EQ Q value, it's unavailable while EQ rype
is HIGH-SHELF .
LOW-SI{ELF.
2.
Parameter setting in output channel-
2. I GAIN & MUTE: press IMUTEI to adjust MUTE or cancel MUTE.
Tirm the small rotatory button to adjust the GAIN.
2.2 Limit:press [LIMIT] to enter,/quit LIMIT set, meanwhile the indicator light uploff
press[PUSfyENTER] to shift Limit Threshold .
Limit
Attack Time .
Limit Hold Time .
Limit Release Time "
turn the small rotatory
button to adjusi parameter value.
2.3 Delay.press [DELAY] to enter,/quit Delay set, meanwhile the indicator light up,/off
tum the small rotatory button to adjust parameter value.
2.4 Phase:press IPHASE] to ufter/quit Phase set, meanwhile the indicator light up,zoff ,
hrrn the small rotatory button to adjust parameter value.
2.5 FIPF & LPF:press [HPF/LPF] to enter FIPF set, press[FIPF/LPF] again to shift HPF
and LPF. Tum IFREQ] in CROSSOVER to adjust HPF and LPF frequency, tum
ISLOPE] in crossover to adjust HPF and LPF slope.
2.6 E0:&,erational reans with Parameter setting in input channel.
3.
Function operafion
3. 1 Store
Press [STORE] to enter prograrn store menu. If the program locked, show as Fig. I
and then reftire to main menu.
Program sector
l o c k e d
Fig 1