DIGISYSTEM DSC-302SMD Manual de instrucciones
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de laboratorio DIGISYSTEM DSC-302SMD. DIGISYSTEM DSC-302SMD 3 páginas. Digital centrifuge
Imprimir página
Warnings:
* Do not open the lid before the centrifuge stops completely.
* Do not remove the centrifuge during operation.
* Do not put objects on the top of the lid.
* Do not disassemble the centrifuge by yourself. In the event of a malfunction, the centrifuge should be
repaired by a qualified technician. Before repairing, turn off the power.
Steps:
1. Place the centrifuge on a flat surface. Plug the centrifuge into a properly grounded outlet. Turn on the
power switch. The power indicator on the switch is illuminated.
2. Push the button
screen shows icon "door". Insert an even number of tubes in a symmetrical position into the rotor.
3. Put down and press down the lid. Make sure the lid is closed well. The icon "door" will disappear on the
screen.
4. Push the button
to set the speed value. Push the button
When you setting the RPM value, you can monitor the RCF value on the RCF/TIME display screen.
DIGISYSTEM LABORATORY INSTRUMENTS INC.
Instruction Manual for Digital Centrifuge
, and then the screen is illuminated. Press the button
, the speed value is flash one the screen. Push the button
Lid
Power switch
Control panel
or any other function button to enter the speed value.
www.digisystemlab.com
Emergency bar
to open the lid. The
or
or
REV.1-2021