DIGISYSTEM DSC-302SMD Buku Petunjuk

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Laboratorium DIGISYSTEM DSC-302SMD. DIGISYSTEM DSC-302SMD 3 halaman. Digital centrifuge

Halaman Cetak

Warnings:

* Do not open the lid before the centrifuge stops completely.

* Do not remove the centrifuge during operation.

* Do not put objects on the top of the lid.

* Do not disassemble the centrifuge by yourself. In the event of a malfunction, the centrifuge should be

repaired by a qualified technician. Before repairing, turn off the power.

Steps:

1. Place the centrifuge on a flat surface. Plug the centrifuge into a properly grounded outlet. Turn on the

power switch. The power indicator on the switch is illuminated.

2. Push the button

screen shows icon "door". Insert an even number of tubes in a symmetrical position into the rotor.

3. Put down and press down the lid. Make sure the lid is closed well. The icon "door" will disappear on the

screen.

4. Push the button

to set the speed value. Push the button

When you setting the RPM value, you can monitor the RCF value on the RCF/TIME display screen.

DIGISYSTEM LABORATORY INSTRUMENTS INC.

Instruction Manual for Digital Centrifuge

, and then the screen is illuminated. Press the button

, the speed value is flash one the screen. Push the button

Lid

Power switch

Control panel

or any other function button to enter the speed value.

www.digisystemlab.com

Emergency bar

to open the lid. The

REV.1-2021