Crestron TMK-4L Manual de instalación - Página 11
Navegue en línea o descargue pdf Manual de instalación para Bastidores y soportes Crestron TMK-4L. Crestron TMK-4L 16 páginas. Trim ring mount kits
También para Crestron TMK-4L: Manual de instalación (12 páginas)
Imprimir páginaCrestron TMK-4L & WMKT-4L
Installation Guide – DOC. 6390A
4. Insert the trim ring into the opening, as shown in the following illustration.
Insert Trim Ring into Opening
IMPORTANT
MAKE DRYWALL CUTOUT AS LEVEL AS
POSSIBLE. MOUNTING PLATE ALLOWS
ONLY MINOR ADJUSTMENT OF THE
TOUCHPANEL.
5. Carefully pass the mounting plate through the opening and hold it against
the interior surface of the drywall.
6. When the mounting plate is in position, bend the top two flanges of the trim
ring upward (approximately 90 degrees) and the bottom two flanges
downward (approximately 90 degrees). Refer to the illustration on the
following page.
NOTE: The mounting plate will have a slight play; this is normal. It allows for
minor adjustments to the touchpanel during installation.
Trim Ring Mount Kits
MOUNTING PLATE
(2013242)
TRIM RING
(2013241)
Trim Ring Mount Kits: TMK-4L & WMKT-4L • 7