Crestron TMK-4L 설치 매뉴얼 - 페이지 11

{카테고리_이름} Crestron TMK-4L에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron TMK-4L 16 페이지. Trim ring mount kits
Crestron TMK-4L에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

Crestron TMK-4L & WMKT-4L

Installation Guide – DOC. 6390A

4. Insert the trim ring into the opening, as shown in the following illustration.

Insert Trim Ring into Opening

IMPORTANT

MAKE DRYWALL CUTOUT AS LEVEL AS

POSSIBLE. MOUNTING PLATE ALLOWS

ONLY MINOR ADJUSTMENT OF THE

TOUCHPANEL.

5. Carefully pass the mounting plate through the opening and hold it against

the interior surface of the drywall.

6. When the mounting plate is in position, bend the top two flanges of the trim

ring upward (approximately 90 degrees) and the bottom two flanges

downward (approximately 90 degrees). Refer to the illustration on the

following page.

NOTE: The mounting plate will have a slight play; this is normal. It allows for

minor adjustments to the touchpanel during installation.

Trim Ring Mount Kits

MOUNTING PLATE

(2013242)

TRIM RING

(2013241)

Trim Ring Mount Kits: TMK-4L & WMKT-4L • 7