Sharp AL-2051 Manual de inicio - Página 4

Navegue en línea o descargue pdf Manual de inicio para Impresora todo en uno Sharp AL-2051. Sharp AL-2051 45 páginas. Digital multifunctional system
También para Sharp AL-2051: Manual de inicio (41 páginas), Manual de servicio (6 páginas)

Imprimir página

4. LOADING PAPER

Raise the handle of the paper tray and

pull the paper tray out until it stops.

Squeeze the lever of paper guide (A) and slide

the guide to match with the width of the paper.

Move paper guide (B) to the appropriate slot

as marked on the tray.

(B)

5. CONNECTING THE POWER CORD / POWER ON

If you use the unit in a country other than the country where the unit was purchased, you will need to make sure that your local power supply is

compatible with your model. If you plug the unit into an incompatible power supply, irreparable damage to the unit will result.

Ensure that the power switch of the

unit is in the OFF position.

OFF

About the scan head

The scan head lamp remains on constantly when the unit is in the ready condition (when the start (

The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not

indicate unit trouble.

6. HOW TO USE THE OPERATION GUIDE

Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format.

Insert the supplied CD-ROM into your

computer's CD-ROM drive.

Operation Guide CD-ROM

A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP.

SHARP Manufacturing France - Customer Documentation Department

Route de Bollwiller

68 360 SOULTZ - FRANCE

or by fax (+33) 3.89.74.87.78

Please inform the model name, the serial number of the machine and the language needed. Do not forget to add your name and your address.

Rotate the pressure plate lock in the direction

of the arrow to remove it while pressing down

the pressure plate of the paper tray.

Fan the paper and insert it into the tray.

Make sure the edges go under the

corner hooks.

(A)

Insert the attached power cord into the power cord

socket at the rear of the unit.

Plug the other end of the power cord into the

nearest outlet.

• Only insert the power cord into a properly

grounded wall socket.

• Do not use extension cords or power strips.

Display the contents of the CD-ROM, and open

the Operation Guide file.

Manual

English

) indicator is illuminated).

Operation Guide file (PDF)

Store the pressure plate lock which has been

removed in step 2. To store the pressure plate

lock, rotate the lock to fix it on the relevant

location.

Gently push the paper tray back into the unit.

• Be sure that paper is free of rips, dust,

wrinkles, and curled or bent edges.

• Make sure all the paper in the stack is

the same size and type.

• When loading paper, ensure there is no

space between the paper and the

guide, and check if the guide is not set

too narrow causing the paper to bend.

Loading paper in these ways will result

in document skew or a paper jam.

Turn the power switch on the left side of the

unit to the "ON" position.

* To view the Operation Guide in PDF format,

Adobe

Reader

or Acrobat

Adobe Systems Incorporated is required.

Adobe

Reader

can be downloaded from the

following URL:

http://www.adobe.com/

Reader