Sharp AL-2051 Manual de inicio - Página 6

Navegue en línea o descargue pdf Manual de inicio para Impresora todo en uno Sharp AL-2051. Sharp AL-2051 45 páginas. Digital multifunctional system
También para Sharp AL-2051: Manual de inicio (41 páginas), Manual de servicio (6 páginas)

Imprimir página

CAUTIONS

Each instruction also covers the optional units used with the product.

Caution label on the machine

The label (

) in the fusing area of the machine indicates the

following:

: Caution, risk of danger

: Caution, hot surface

Cautions on using the machine

Follow the cautions below when using this machine.

Warning:

• The fusing area is hot. Exercise care in this area when removing misfed

paper.

• Do not look directly at the light source. Doing so may damage your eyes.

• Do not switch the machine rapidly on and off. After turning the machine

off, wait 10 to 15 seconds before turning it back on.

• Machine power must be turned off before installing any supplies.

Caution:

• Place the machine on a firm, level surface.

• Do not install the machine in a humid or dusty location.

• When the machine is not used for a long time, for example for consecutive

holidays, turn the power switch off and remove the power cord from the outlet.

• When moving the machine, be sure to turn the power switch off and

remove the power cord from the outlet.

• Do not cover the machine with a dust cover, cloth or plastic film while the

power is on. Doing so may prevent heat radiation, damaging the machine.

• The socket-outlet shall be installed near the machine and shall be easily

accessible.

Important points when selecting an installation site

Do not install your machine in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or humidity changes, e.g., near an air

conditioner or heater.

Be sure to allow the required space

around the machine for servicing

and proper ventilation.

Cautions on handling the machine

Be careful in handling the machine as follows to maintain the performance of

this machine.

Do not drop the machine, subject it to shock or strike it against any object.

Do not expose the drum cartridge to direct sunlight.

• Doing so will damage the surface (green portion) of the drum cartridge,

causing smudges on copies.

Store spare supplies such as drum cartridges and TD (Toner/Developer)

cartridges in a cool dry place without removing from the package before use.

• If they are exposed to direct sunlight, or excessive heat, poor copies may result.

Do not touch the surface (green portion) of the drum cartridge.

• Scratches or smudges on the drum will cause dirty copies.

Supply and Consumables

The supply of spare parts for a repair of the appliance is guaranteed for at

least 7 years following the termination of production. Spare parts are

those parts of the apparatus which may break down within the scope of

ordinary use of the product, whereas those parts which normally exceed

the life of the product are not considered spare parts. Consumables also,

are available for 7 years following the termination of production.

Trademark acknowledgements

• Microsoft

, Windows

2003, Windows

Server 2008, Windows Vista

Explorer

are registered trademarks or trademarks of Microsoft

Corporation in the U.S.A. and other countries.

• Macintosh is a trademark of Apple Inc., registered in the U.S. and other

countries.

• IBM, PC/AT, and PowerPC are trademarks of International Business

Machines Corporation.

• Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Reader are

registered trademarks or trademarks of Adobe Systems Incorporated in

the United States and other countries.

• Sharpdesk is a trademark of Sharp Corporation.

• All other trademarks and copyrights are the property of their respective

owners.

20 cm

10 cm

2000, Windows

XP, Windows

, Windows

7 and Internet

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software

from the CD-ROM. By using all or any portion of the software on the CD-

ROM or in the machine, you are agreeing to be bound by the terms of

the SOFTWARE LICENSE.

ENVIRONMENTAL INFORMATION

The products that meet the ENERGY STAR

The products without the logo may not meet the ENERGY STAR

CAUTION:

Do not install the machine in a location with poor air circulation.

A small amount of ozone is created inside the machine during printing. The

amount of ozone created is not sufficient to be harmful; however, an unpleasant

odor may be noticed during large copy runs, and thus the machine should be

installed in a room with a ventilation fan or windows that provide sufficient air

circulation. (The odor may occasionally cause headaches.)

* Install the machine so that people are not directly exposed to exhaust

from the machine. If installed near a window, ensure that the machine is

not exposed to direct sunlight.

In some areas, the "POWER" switch positions are marked "I" and " " on

the copier instead of "ON" and "OFF".

If your copier is so marked, please read "I" for "ON" and " " for "OFF".

Caution!

For a complete electrical disconnection, pull out the main plug.

The socket-outlet shall be installed near the equipment and shall

be easily accessible.

Shielded interface cables must be used with this equipment to maintain

compliance with EMC regulations.

Laser information

Wave length

Pulse times (North America)

10 cm

Output power

At the production line, the output power of the scanner unit is adjusted to

0.18 MILLIWATT PLUS 5% and is maintained constant by the operation of

the Automatic Power Control (APC).

Caution

Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1

Edition 1.2-2001)

Caution

This product contains a low power laser device. To ensure continued

safety do not remove any cover or attempt to gain access to the inside of

the product.

Refer all servicing to qualified personnel.

This product is designed for commercial application only and as such it

falls outside the scope of Regulation (EC) 1275/2008 implementing EU

Directive 2005/32/EC on eco-design requirements for standby and off

mode electric power consumption. Sharp does not recommend the

product for domestic application and will not accept any liability for such

use.

Server

Emission density (measured according to RALUZ122: Edition

Jun.2006)

Measured

chemicals

Ozone

Dust

Styrene

Benzene

TVOC

Products that have earned the ENERGY STAR

are designed to protect the environment through

superior energy efficiency.

guidelines carry the logo shown above.

780 nm +15 nm

-10 nm

12.88 μs ±12.88 ns/7 mm

Max 0.2 mW

Condition of

Colour mode

copier

Black and white

When copier is in

Black and white

operation

Black and white

When on standby

guidelines.

Diffusion speed

1.5 gm/h or less

4.0 gm/h or less

1.0 gm/h or less

0.05 gm/h or less

10 gm/h or less

2.0 gm/h or less