SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE
STORING A CUSTOM DIRECTORY
Programmed destinations appear as one-touch keys in the
and are normally included in the ABC index. Two types of indexes are available: the ABC index and group indexes
(custom directories). Group indexes allow you to assign any index name to the destination for easy searching. Six
group indexes are available, and a name up to six characters long can be assigned to each.
Click "Custom Directories" in the menu frame of the Web page to display the following screen. Group index names
can be programmed and edited in this screen. Enter names for indexes 1 through 6 and then click "Submit". If you
wish to change a previously programmed name, enter the new name and save it.
For information on grouping destinations in a group index, see the appropriate pages for programming the
transmission methods. For information on switching between the ABC index and group indexes, see
Click here.
NOTE
You can also store indexes in the Custom Directory from the touch panel of the machine.
PROTECTING INFORMATION PROGRAMMED IN THE WEB
PAGE ("Passwords")
Passwords can be set to restrict Web page access and protect settings. Note that it is not necessary to set
passwords; the network scanner functionality can also be used without passwords.
A password can be set for the administrator and passwords can be set for each user. If you use a user password to
access the Web page, you will be able to establish, edit, and delete destinations in the Scanner Destination
Management menu; however, you will not be able to establish settings in the Setup menu.
The passwords for "User" and "admin" are both initially set to "Sharp". If you wish to change the passwords when first
establishing the settings, enter "Sharp" in "Old Admin Password" before you establish the settings. A password must
consist of alphanumeric characters and be no more than seven characters long. Passwords are case sensitive. After
entering a password, click "Submit" to set it. After setting the password, turn the machine power off and then back on.
When a password is set, you will be prompted for the password when you attempt to access a Web page with
protected settings. For the "User name", enter "user" if you are accessing the page as a user, or "admin" if you are
accessing the page as an administrator. For detailed information on setting passwords, refer to "Help".
Address directory screen
TABLE OF CONTENTS
of the touch panel
(page
31)
13
(page
15),
page
15.
Imprimir página