Sharp AR-C260 Network Scanner Operations - Page 15

Browse online or download pdf Network Scanner Operations for All in One Printer Sharp AR-C260. Sharp AR-C260 42 pages. Color adjustment
Also for Sharp AR-C260: Key Operator's Manual (19 pages), Printer Operation Manual (50 pages), Software Installation Manual (25 pages), Color Management Manual (8 pages), Installation Manual (15 pages), User Manual (8 pages)

Print Page

SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE

STORING A CUSTOM DIRECTORY

Programmed destinations appear as one-touch keys in the

and are normally included in the ABC index. Two types of indexes are available: the ABC index and group indexes

(custom directories). Group indexes allow you to assign any index name to the destination for easy searching. Six

group indexes are available, and a name up to six characters long can be assigned to each.

Click "Custom Directories" in the menu frame of the Web page to display the following screen. Group index names

can be programmed and edited in this screen. Enter names for indexes 1 through 6 and then click "Submit". If you

wish to change a previously programmed name, enter the new name and save it.

For information on grouping destinations in a group index, see the appropriate pages for programming the

transmission methods. For information on switching between the ABC index and group indexes, see

Click here.

NOTE

You can also store indexes in the Custom Directory from the touch panel of the machine.

PROTECTING INFORMATION PROGRAMMED IN THE WEB

PAGE ("Passwords")

Passwords can be set to restrict Web page access and protect settings. Note that it is not necessary to set

passwords; the network scanner functionality can also be used without passwords.

A password can be set for the administrator and passwords can be set for each user. If you use a user password to

access the Web page, you will be able to establish, edit, and delete destinations in the Scanner Destination

Management menu; however, you will not be able to establish settings in the Setup menu.

The passwords for "User" and "admin" are both initially set to "Sharp". If you wish to change the passwords when first

establishing the settings, enter "Sharp" in "Old Admin Password" before you establish the settings. A password must

consist of alphanumeric characters and be no more than seven characters long. Passwords are case sensitive. After

entering a password, click "Submit" to set it. After setting the password, turn the machine power off and then back on.

When a password is set, you will be prompted for the password when you attempt to access a Web page with

protected settings. For the "User name", enter "user" if you are accessing the page as a user, or "admin" if you are

accessing the page as an administrator. For detailed information on setting passwords, refer to "Help".

Address directory screen

TABLE OF CONTENTS

of the touch panel

(page

31)

(page

15),

page

15.