Sharp DX-2500N Manual de configuración del software - Página 33

Navegue en línea o descargue pdf Manual de configuración del software para Impresora todo en uno Sharp DX-2500N. Sharp DX-2500N 43 páginas.

CHANGING THE PORT

When using the machine in a Windows environment, follow the steps below to change the port when you have changed

the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If

the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP

Port" (page 32) for the remaining steps of the procedure to change the port.

Click the [Start] button (

[Control Panel], and then click [Devices

and Printers] (or [View devices and

printers]).

In Windows 8/Server 2012, right-click in the startup

window (or swipe upward from the bottom edge), then

select [Taskbar] → [All Applications] → [Control Panel] →

[Devices and Printers] → [Printers].

Open the printer properties window.

(1) Right-click the printer driver icon of the

machine.

(2) Select [Printer properties].

), click

Adding or changing a port.

(2)

(1) Click the [Ports] tab.

(2) Click the [Add Port] button.

To change to a previously created port such as USB

port, select the desired port (USB001, etc.) from the

list and click the [Apply] button. This changes the port.

(1)