Sharp DX-2500N Software Setup Manual - Page 33
Browse online or download pdf Software Setup Manual for All in One Printer Sharp DX-2500N. Sharp DX-2500N 43 pages.
Print Page
CHANGING THE PORT
When using the machine in a Windows environment, follow the steps below to change the port when you have changed
the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If
the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP
Port" (page 32) for the remaining steps of the procedure to change the port.
1
Click the [Start] button (
[Control Panel], and then click [Devices
and Printers] (or [View devices and
printers]).
In Windows 8/Server 2012, right-click in the startup
window (or swipe upward from the bottom edge), then
select [Taskbar] → [All Applications] → [Control Panel] →
[Devices and Printers] → [Printers].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the
machine.
(2) Select [Printer properties].
3
), click
Adding or changing a port.
(2)
(1) Click the [Ports] tab.
(2) Click the [Add Port] button.
To change to a previously created port such as USB
port, select the desired port (USB001, etc.) from the
list and click the [Apply] button. This changes the port.
(1)
31