Digital Acoustics IP7-SS40 Manual de referencia - Página 12
Navegue en línea o descargue pdf Manual de referencia para Transformador Digital Acoustics IP7-SS40. Digital Acoustics IP7-SS40 20 páginas. Audio transformer
También para Digital Acoustics IP7-SS40: Instrucciones de instalación (2 páginas)
Imprimir página
8 Ohm Speaker(s)
The following configurations are supported for driving 8 Ohm speakers.
If you plan on driving more than one speaker, consider using 25/70V
Speaker(s) with optional 25/70V transformer as described in the
previous section. The maximum distance between the IP7 and the
farthest speaker should not exceed 200 feet (60 meters)
A single 8 Ohm speaker
Two 8 Ohm speakers must be wired in parallel (total 4 ohm load).
Four 8 Ohm speakers must be wired in series-parallel
Note:
Loads from 4 ohms to 12
ohms are supported by the
SS40, however maximum
power is transferred at 8
ohms.
9