Digital Acoustics IP7-SS40 Manuale di riferimento - Pagina 12
Sfoglia online o scarica il pdf Manuale di riferimento per Trasformatore Digital Acoustics IP7-SS40. Digital Acoustics IP7-SS40 20. Audio transformer
Anche per Digital Acoustics IP7-SS40: Istruzioni per l'installazione (2 pagine)
Stampa la pagina
8 Ohm Speaker(s)
The following configurations are supported for driving 8 Ohm speakers.
If you plan on driving more than one speaker, consider using 25/70V
Speaker(s) with optional 25/70V transformer as described in the
previous section. The maximum distance between the IP7 and the
farthest speaker should not exceed 200 feet (60 meters)
A single 8 Ohm speaker
Two 8 Ohm speakers must be wired in parallel (total 4 ohm load).
Four 8 Ohm speakers must be wired in series-parallel
Note:
Loads from 4 ohms to 12
ohms are supported by the
SS40, however maximum
power is transferred at 8
ohms.
9